Colour

Choose your colour

Pick a shade and it travels with your order — we see it the moment the order lands, and tint your pail by hand to match before it ships.

Two things worth knowing before you choose

Any colour, not just these. Custom colour matching is $30 per order, at any size. Pick Custom match below and the fee is added to your cart automatically — or call 469-773-9067 to talk it through first. Send a paint code from any brand, a photograph, a fabric swatch, a stone sample, or a wall you already have.

Every shipment includes additional pigment. Sealed, already diluted, in the box — so if the wall dries lighter than you wanted, you can darken the mix yourself, on site, while you are still working. Limewash always dries lighter than it looks wet, and most of all on a big wall with a lot of natural light. No other limewash company ships you the means to fix that.

The collection

Skip — I will specify a colour later

What ships in the box

Every order, every size, every colour.

  • Your limewash, tinted by hand to the colour you chose.
  • The physical swatch, taped to the lid — with a brush-out of your actual tinted limewash across half of it.
  • A sealed can of additional pigment, diluted and ready, so you can darken the mix on site.
  • The full application course — brush, dilution, movement, and how to fix an uneven section.

See sizes & prices Call about a custom match

Common questions

Can I get a colour that is not on this list?

Yes. Custom colour matching is $30 per order, at any size. Choose Custom match on this page and the fee is added to your cart automatically, or call 469-773-9067 to talk it through first. Send a paint code from any brand, a photograph, a fabric swatch, a stone sample, or a wall you already have and we will match it by hand.

Why does limewash dry lighter than the swatch?

Lime is a mineral that absorbs light rather than a plastic film reflecting it at a fixed value. Wet limewash is saturated and dark; as it cures it lightens considerably. The effect is strongest on large walls with a lot of natural light — exactly where people are most likely to be surprised by it. It is how lime behaves, not a fault.

What if my wall dries lighter than I wanted?

You darken it on the spot. Every shipment includes a sealed can of additional pigment, already diluted. Add it to your remaining mix, brush a test, let it flash off and keep going. No other limewash company ships you the means to adjust mid-job.

How do I know the colour is right before I start?

Every order ships with the physical swatch we matched against, taped to the lid, with a brush-out of your actual tinted limewash across half of it. You are holding the match we made, in the material we sent you, rather than judging it on a screen.

Keep reading

How to apply it Colour dries lighter than it looks wet. This is why that matters. How much will you need? Work it out before you order. Colour on brick The brick underneath is part of the result. Plan for it.

Who we are

Thirty seconds, then stay for the podcast.

I’m Ben Lynch. I started LimeWash Pros after reading what the EPA had published about the air inside ordinary American houses — and realizing the walls were the problem.

Video thumbnail: Meet LimeWash Pros

Meet LimeWash Pros

Who we are, what lime does that paint cannot, and why the air inside your house is the reason we do this.

The podcast

  • Video thumbnail: From Setback to Limewash Success: Meet Ben Lynch11:33

    From Setback to Limewash Success: Meet Ben Lynch

    Why I walked away from conventional paint, what I found in the research on VOCs, and how that turned into LimeWash Pros.

  • Video thumbnail: How Modern Paint is Killing You12:10

    How Modern Paint is Killing You

    The VOCs in ordinary latex paint don’t stop off-gassing when the wall dries. What that does to the air in your house.

  • Video thumbnail: The Carcinogen On Your Walls9:43

    The Carcinogen On Your Walls

    Benzene is a known human carcinogen and it is in the paint on every surface of your home. What the research says.